Compare LED types and legacy light sources
One sortable, filterable table of 25 light sources, with links to every head-to-head guide
This is the encyclopedia's single comparison dataset. Each row is one kind of light source, from a 5 mm indicator LED to a high-pressure sodium streetlamp, with the specifications that decide which one suits a job. Sort any column, narrow the rows with the filters, share the address of a filtered view, or download the whole table as a CSV file.
Comparison table
This table compares 25 light sources: 19 LED and OLED types and six legacy lamps. Mid-power SMD 2835 and 3030 LEDs reach 220 lumens per watt against 10–17 for incandescent bulbs, an SMD 3030 lasts 50,000–100,000 hours against 750–2,000, and every LED type is mercury-free, unlike fluorescent, metal halide and sodium lamps.
No light source matches every filter. Loosen one of them, or clear the filters to see all 25 rows.
| Type | Efficacy (lm/W) | Lifespan (h) | CRI | Heat handling | Cost | Mercury-free | Dimmable | Typical applications |
|---|---|---|---|---|---|---|---|---|
| DIP 3 / 5 mm | 20–90 | 20,000–50,000 | 65–80 | Poor (leads only) | $ | Yes | Yes (PWM or current) | Indicators, hobby electronics, large-pitch signs |
| Piranha / superflux | 40–80 | 30,000–50,000 | 65–80 | Fair (4 leads) | $ | Yes | Yes (PWM or current) | Older tail lights, signage, accent |
| SMD 3528 | 60–100 | 25,000–50,000 | 70–90 | Fair | $ | Yes | Yes (PWM or current) | Low-output strips, backlights |
| SMD 2835 | 120–220 | 35,000–60,000 | 80–97 | Good (thermal pad) | $ | Yes | Yes (PWM or current) | Bulbs, tubes, panels, efficient white strips |
| SMD 3030 (EMC) | 150–220 | 50,000–100,000 | 70–90 | Very good | $$ | Yes | Yes (PWM or current) | High-bays, streetlights, horticulture |
| SMD 5050 (white) | 70–110 | 30,000–50,000 | 70–90 | Fair | $ | Yes | Yes (PWM or current) | Signage, legacy strips, tunable/RGBW strips |
| SMD 5630 / 5730 | 100–150 | 30,000–50,000 | 70–90 | Good | $ | Yes | Yes (PWM or current) | Panels, troffers, T8 tubes, corn bulbs |
| High-power emitter (1–10 W) | 100–200 | 50,000–100,000 | 70–95 | Excellent with heat sink | $$ | Yes | Yes (PWM or current) | Flashlights, headlamps, floodlights, bike lights |
| COB (10–200 W) | 100–180 | 30,000–60,000 | 80–98 | Needs a large heat sink | $$ | Yes | Yes (PWM or current) | Downlights, spotlights, retail, high-bay, stage |
| CSP (flip-chip) | 130–200 | 50,000+ | 70–90 | Excellent (direct to PCB) | $$ | Yes | Yes (PWM or current) | Backlights, automotive headlamps, flash, dense arrays |
| Filament (COG) | 100–160 | 15,000–25,000 | 80–90 | Fair (gas-cooled bulb) | $ | Yes | Varies (bulbs marked dimmable) | Decorative clear bulbs, pendants, chandeliers |
| OLED | 40–90 (panels) | 20,000–100,000 | 85–95 (lighting) | Low heat, area source | $$$ | Yes | Yes (PWM or current) | Phones, watches, TVs, design luminaires |
| QLED (QD-enhanced LCD) | — | 50,000–100,000 | — | Good | $$ | Yes | Yes (backlight) | TVs, monitors |
| Mini-LED backlight | — | 50,000–100,000 | — | Good | $$$ | Yes | Yes (backlight) | HDR TVs, tablets, laptops, monitors |
| MicroLED | — | 100,000 (projected) | — | Good | $$$$ | Yes | Yes (per pixel) | Premium modular walls, AR microdisplays, watches |
| IR 850 / 940 nm | — (WPE 30–50%) | 50,000+ | n/a | Good | $ | Yes | Yes (PWM or current) | CCTV, remotes, sensors, optocouplers, PBM |
| UV-A 365–405 nm | — (WPE 20–60%) | 10,000–30,000 | n/a | Fair | $$ | Yes | Yes (PWM or current) | Curing, 3D printing, inspection, forensics |
| UV-C 255–280 nm | — (WPE 2–10%) | 5,000–20,000 | n/a | Poor (high heat per mW) | $$$ | Yes | Yes (PWM or current) | Water, air and surface disinfection |
| Addressable 5050 (WS2812B) | 40–80 (white) | 25,000–50,000 | 50–70 (RGB white) | Fair | $$ | Yes | Yes (built-in PWM) | Pixel strips, DJ and stage, gaming, art |
| Incandescent | 10–17 | 750–2,000 | 100 | Very hot (~90% IR) | $ | Yes | Yes (phase-cut dimmer) | Phased out for general lighting |
| Halogen | 15–24 | 2,000–4,000 | 100 | Very hot | $ | Yes | Yes (phase-cut dimmer) | Old spotlights and headlamps |
| CFL | 50–70 | 8,000–10,000 | 80–85 | Warm; contains mercury | $ | No (contains mercury) | Varies (models marked dimmable) | Phased out in the EU (2023) |
| Linear fluorescent T8 | 80–100 | 20,000–36,000 | 80–86 | Ballast losses; mercury | $ | No (contains mercury) | Varies (needs a dimming ballast) | Offices and schools, being retrofitted |
| Metal halide | 65–115 | 10,000–20,000 | 65–95 | Very hot; slow restrike | $$ | No (contains mercury) | Varies (needs a dimming ballast) | Old high-bays and stadiums |
| High-pressure sodium | 80–140 | ~24,000 | 20–25 | Hot; slow warm-up | $ | No (contains mercury) | Varies (needs a dimming ballast) | Old streetlights, greenhouses |
Download this table as a CSV file. Sorting uses the middle of each range; the filters use the top of each range, so "CRI reaches 90 or more" keeps every type that is sold in a CRI 90 version.
How to read the columns
Efficacy is light output per watt of electrical input, in lumens per watt. Lifespan is the rated hours of use, for LEDs usually the L70 point where output has fallen to 70% of its initial value. CRI scores color rendering up to 100. Values are typical ranges for current-generation products, not guarantees for any one model.
- Efficacy (lm/W): see luminous efficacy. Infrared and ultraviolet emitters make no visible light, so their rows give wall-plug efficiency instead.
- Lifespan (h): see L70 and the guide to LED lifespan, L70 and LM-80.
- CRI: see color rendering index and the CRI and CCT guide.
- Heat handling: how easily the package passes heat to a circuit board or heat sink.
- Cost: relative purchase cost, from $ (lowest) to $$$$ (highest).
- Mercury-free: "Yes" means the light source contains no mercury. Fluorescent, metal halide and high-pressure sodium lamps contain it.
- Dimmable: "Yes" means every product of this type can be dimmed with a suitable driver or dimmer. "Varies" means only models, ballasts or drivers made for dimming allow it. See how LEDs are dimmed.
Head-to-head comparison guides
Each comparison guide takes one buying decision and settles it with the numbers: SMD 2835 against 5050 and 3030 packages, COB against SMD and CSP, OLED against QLED, Mini-LED and MicroLED screens, and look-alike bulb bases such as E26 and E27 or GU10 and MR16.
LED packages and displays
Household bulb bases
Automotive bulbs
Sources
- Manufacturer datasheets: Samsung LM281B/LM301 series, Nichia NF2W757, Lumileds LUXEON 2835 and 3030, Cree XLamp XP/XHP, Worldsemi WS2812B, Opsco SK6812, APA Electronic APA102.
- U.S. DOE, "Solid-State Lighting R&D Opportunities" (2022), and the DOE LED lighting facts database.
- Y. Huang et al., "Mini-LED, Micro-LED and OLED displays: present status and future perspectives," Light: Science & Applications 9, 105 (2020).
- M. Kneissl et al., "The emergence and prospects of deep-ultraviolet light-emitting diode technologies," Nature Photonics 13, 233–244 (2019).
- IES LM-80-20 and ANSI/IES TM-21-21, the lumen-maintenance test and projection methods behind the lifespan figures in the comparison table.
- United Nations Environment Programme, Minamata Convention on Mercury (2013) and later amendments phasing out mercury lamps.
Cite this page
IEEE
LEDlights.org. "Compare LED types and legacy light sources." LEDlights.org. https://ledlights.org/compare/ (accessed Nov. 16, 2026).BibTeX
@misc{ledlights2026compare,
author = {{LEDlights.org}},
title = {Compare LED types and legacy light sources},
year = {2026},
month = nov,
howpublished = {\url{https://ledlights.org/compare/}},
note = {Accessed: 2026-11-16}
}APA
LEDlights.org. (2026, November 16). Compare LED types and legacy light sources. https://ledlights.org/compare/
Markdown
[Compare LED types and legacy light sources](https://ledlights.org/compare/), LEDlights.org, updated November 16, 2026.